How to install a magwell on CZ Scorpion Evo 3

Getting an enhanced magwell for your CZ Scorpion Evo is an easy upgrade you can do at home with a few basic tools. Note: these magwells are designed to fit CZ Scorpion Evo models, not Evo 3+.

How to install a magwell on CZ Scorpion Evo

What will you need

2 mm Allen key (5/64 inch) — for Toni System magwells
Hammer — for the Manul Corp magwell
4 mm roll pin punch — for the Manul Corp magwell
2.5 mm Allen key (3/32 inch) — for Manul Corp magwell

Step by step guide

Toni System magwells

Make sure you have an empty chamber.
Loosen the grub screws on the sides of the magwell (hex key size 2 mm / 5/64 inch).
Slide the magwell on fully.
Screw the side screws back in.

Manul Corp magwells

Make sure you have an empty chamber.
Align the punch with the roll pin of the mag release and hammer it out.
Slide the magwell on and press back the mag release.
Align the holes, install the magwell screw, fit the hex nut on the other side, and tighten.